CPU 013C

Powered by SPEED7
Munkamemória [KB]: 64...128
Fedélzeti 16x DI / 12x DO / 2x AI [feszültség 0...10 V] ] / 4x számláló / 2x [PWM/impulzus vonat]
Interfész [2x RJ45]: aktív Ethernet PG/OP kommunikáció DHCP támogatással, switch, ModbusTCP master/slave, openCommunication, I-Device, PROFINET IO vezérlő (8 eszköz)
Interfész [RS485]: MPI, PtP: ASCII, STX/ETX, 3964 (R), USS master, Modbus master/slave
Opcionális: PROFIBUS master/slave
web szerver
SD kártyanyílás zárral, akár 64 bővítőmodul,

Programozható a SPEED7 Studio, a SIMATIC Manager és a TIA Portal segítségével

Termék tudás szintje megfelel: Siemens 1215  - 6ES7215-1HG40-0XB0

013-CCF0R00 - CPUs | CPUs STEP7 programmable, C class

Order no.

013-CCF0R00

Type      CPU 013C

Module ID          -

General information

Note     -

Features             Powered by SPEED7

Work memory [KB]: 64...128

Onboard 16x DI / 12x DO / 2x AI [voltage 0...10 V] ] / 4x Counter / 2x [PWM/Pulse Train]

Interface [2x RJ45]: active Ethernet PG/OP communication with DHCP support, switch, ModbusTCP master/slave, openCommunication, I-Device, PROFINET IO controller (8 devices)

Interface [RS485]: MPI, PtP: ASCII, STX/ETX, 3964 (R), USS master, Modbus master/slave

Optional: PROFIBUS master/slave

Web server

SD card slot with locking, up to 64 expansion modules, configurable with SPEED7 Studio, SIMATIC Manager and TIA Portal

Technical data power supply

Power supply (rated value)        DC 24 V

Power supply (permitted range)             DC 20.4...28.8 V

Reverse polarity protection      

Current consumption (no-load operation)          120 mA

Current consumption (rated value)        360 mA

Inrush current  3 A

I2t           0.1 A2s

Max. current drain at backplane bus      1 A

Max. current drain load supply 6 A

Power loss         7 W

Technical data digital inputs

Number of inputs           16

Cable length, shielded  1000 m

Cable length, unshielded            600 m

Rated load voltage         DC 24 V

Reverse polarity protection of rated load voltage          

Current consumption from load voltage L+ (without load)          25 mA

Rated value       DC 24 V

Input voltage for signal "0"         DC 0...5 V

Input voltage for signal "1"         DC 15...28.8 V

Input voltage hysteresis              -

Signal logic input              Sinking input

Frequency range             -

Input resistance              -

Input current for signal "1"         3 mA

Connection of Two-Wire-BEROs possible           

Max. permissible BERO quiescent current          0.5 mA

Input delay of "0" to "1"              3 µs – 15 ms / 0.5 ms – 15 ms

Input delay of "1" to "0"              3 µs – 15 ms / 0.5 ms – 15 ms

Number of simultaneously utilizable inputs horizontal configuration     16

Number of simultaneously utilizable inputs vertical configuration           16

Input characteristic curve            IEC 61131-2, type 1

Initial data size  16 Bit

Technical data digital outputs

Number of outputs        12

Cable length, shielded  1000 m

Cable length, unshielded            600 m

Rated load voltage         DC 24 V

Reverse polarity protection of rated load voltage          

Current consumption from load voltage L+ (without load)          20 mA

Total current per group, horizontal configuration, 40°C 6 A

Total current per group, horizontal configuration, 60°C 6 A

Total current per group, vertical configuration  6 A

Output voltage signal "1" at min. current             L+ (-0.8 V)

Output voltage signal "1" at max. current            L+ (-0.8 V)

Output current at signal "1", rated value             0.5 A

Signal logic output          Sourcing output

Output current, permitted range to 40°C            5 mA to 0.6 A

Output current, permitted range to 60°C            5 mA to 0.6 A

Output current at signal "0" max. (residual current)       0.5 mA

Output delay of "0" to "1"           2 µs / 30 µs

Output delay of "1" to "0"           3 µs / 175 µs

Minimum load current  -

Lamp load           10 W

Parallel switching of outputs for redundant control of a load     not possible

Parallel switching of outputs for increased power           not possible

Actuation of digital input            

Switching frequency with resistive load               max. 1000 Hz

Switching frequency with inductive load             max. 0.5 Hz

Switching frequency on lamp load          max. 10 Hz

Internal limitation of inductive shut-off voltage               L+ (-45 V)

Short-circuit protection of output           yes, electronic

Trigger level       1 A

Number of operating cycle of relay outputs       -

Switching capacity of contacts   -

Output data size              12 Bit

Technical data analog inputs

Number of inputs           2

Cable length, shielded  200 m

Rated load voltage         -

Reverse polarity protection of rated load voltage           -

Current consumption from load voltage L+ (without load)          -

Voltage inputs 

Min. input resistance (voltage range)    100 k?

Input voltage ranges     0 V ... +10 V

Operational limit of voltage ranges         +/-3.5%

Operational limit of voltage ranges with SFU     -

Basic error limit voltage ranges +/-3.0%

Basic error limit voltage ranges with SFU             -

Destruction limit voltage             max. 30V

Current inputs  -

Max. input resistance (current range)   -

Input current ranges     -

Operational limit of current ranges         -

Operational limit of current ranges with SFU     -

Basic error limit current ranges -

Radical error limit current ranges with SFU         -

Destruction limit current inputs (electrical current)        -

Destruction limit current inputs (voltage)            -

Resistance inputs            -

Resistance ranges           -

Operational limit of resistor ranges        -

Operational limit of resistor ranges with SFU     -

Basic error limit -

Basic error limit with SFU             -

Destruction limit resistance inputs          -

Resistance thermometer inputs              -

Resistance thermometer ranges             -

Operational limit of resistance thermometer ranges     -

Operational limit of resistance thermometer ranges with SFU  -

Basic error limit thermoresistor ranges -

Basic error limit thermoresistor ranges with SFU             -

Destruction limit resistance thermometer inputs            -

Thermocouple inputs    -

Thermocouple ranges   -

Operational limit of thermocouple ranges          -

Operational limit of thermocouple ranges with SFU       -

Basic error limit thermoelement ranges               -

Basic error limit thermoelement ranges with SFU           -

Destruction limit thermocouple inputs -

Programmable temperature compensation       -

External temperature compensation    -

Internal temperature compensation     -

Technical unit of temperature measurement    -

Resolution in bit              12

Measurement principle               successive approximation

Basic conversion time   0.5 ms

Noise suppression for frequency            40 dB

Initial data size  4 Byte

Technical data analog outputs

Number of outputs        -

Cable length, shielded  -

Rated load voltage         -

Reverse polarity protection of rated load voltage           -

Current consumption from load voltage L+ (without load)          -

Voltage output short-circuit protection                -

Voltage outputs              -

Min. load resistance (voltage range)      -

Max. capacitive load (current range)     -

Max. inductive load (current range)       -

Output voltage ranges  -

Operational limit of voltage ranges         -

Basic error limit voltage ranges with SFU             -

Destruction limit against external applied voltage           -

Current outputs              -

Max. in load resistance (current range)                -

Max. inductive load (current range)       -

Typ. open circuit voltage current output              -

Output current ranges  -

Operational limit of current ranges         -

Radical error limit current ranges with SFU         -

Destruction limit against external applied voltage           -

Settling time for ohmic load       -

Settling time for capacitive load               -

Settling time for inductive load -

Resolution in bit              -

Conversion time              -

Substitute value can be applied               -

Output data size              -

Technical data counters

Number of counters      4

Counter width  32 Bit

Maximum input frequency        100 kHz

Maximum count frequency       400 kHz

Mode incremental encoder      

Mode pulse / direction

Mode pulse      

Mode frequency counter          

Mode period measurement     

Gate input available      

Latch input available     

Reset input available     -

Counter output available           

Load and working memory

Load memory, integrated           128 KB

Load memory, maximum            128 KB

Work memory, integrated          64 KB

Work memory, maximal              128 KB

Memory divided in 50% program / 50% data     

Memory card slot           SD/MMC-Card with max. 2 GB

Hardware configuration

Racks, max.        5

Modules per rack, max.               total max. 64 minus number line extensions

Number of integrated DP master            -

Number of DP master via CP     -

Operable function modules       64

Operable communication modules PtP 64

Operable communication modules LAN               -

Status information, alarms, diagnostics

Status display    yes

Interrupts           yes

Process alarm   yes

Diagnostic interrupt       yes

Diagnostic functions      yes, parameterizable

Diagnostics information read-out            possible

Supply voltage display  green LED

Group error display        red SF LED

Channel error display    red LED per group

Isolation

Between channels        

Between channels of groups to               16

Between channels and backplane bus 

Between channels and power supply   -

Max. potential difference between circuits       DC 75 V/ AC 50 V

Max. potential difference between inputs (Ucm)           -

Max. potential difference between Mana and Mintern (Uiso) -

Max. potential difference between inputs and Mana (Ucm)     -

Max. potential difference between inputs and Mintern (Uiso) -

Max. potential difference between Mintern and outputs          -

Insulation tested with   DC 500 V

Command processing times

Bit instructions, min.      0.02 µs

Word instruction, min.  0.02 µs

Double integer arithmetic, min.               0.02 µs

Floating-point arithmetic, min. 0.12 µs

Timers/Counters and their retentive characteristics

Number of S7 counters                512

S7 counter remanence adjustable 0 up to 256

S7 counter remanence adjustable          C0 .. C7

Number of S7 times       512

S7 times remanence      adjustable 0 up to 256

S7 times remanence adjustable               not retentive

Data range and retentive characteristic

Number of flags              8192 Byte

Bit memories retentive characteristic adjustable             adjustable 0 up to 256

Bit memories retentive characteristic preset     MB0 .. MB15

Number of data blocks 1024

Max. data blocks size    64 KB

Max. local data size per execution level               4096 Byte

Blocks

Number of OBs                22

Number of FBs 1024

Number of FCs 1024

Maximum nesting depth per priority class          16

Maximum nesting depth additional within an error OB 4

Time

Real-time clock buffered            

Clock buffered period (min.)     30 d

Accuracy (max. deviation per day)          10 s

Number of operating hours counter      8

Clock synchronization  

Synchronization via MPI              Master/Slave

Synchronization via Ethernet (NTP)        no

Address areas (I/O)

Input I/O address area 2048 Byte

Output I/O address area             2048 Byte

Input process image maximal    2048 Byte

Output process image maximal                2048 Byte

Digital inputs     16224

Digital outputs  16256

Digital inputs central      528

Digital outputs central   524

Integrated digital inputs              16

Integrated digital outputs           12

Analog inputs    1015

Analog outputs 1015

Analog inputs, central   514

Analog outputs, central               256

Integrated analog inputs             2

Integrated analog outputs          -

Technical data encoder supply

Number of outputs        1

Output voltage (typ)     L+ (-1.5 V)

Output voltage (rated value)     300 mA

Short-circuit protection                yes, electronic

Binding of potential       Power supply of PLC

Communication functions

PG/OP channel

Global data communication      

Number of GD circuits, max.      8

Size of GD packets, max.             54 Byte

S7 basic communication              

S7 basic communication, user data per job         76 Byte

S7 communication         

S7 communication as server     

S7 communication as client        -

S7 communication, user data per job    160 Byte

Number of connections, max.  32

PWM data

PWM channels 2

PWM time basis              1 µs / 0.1 ms / 1 ms

Period length    50µs...65.535ms / 0.1...87ms / 1...87ms

Minimum pulse width   0...0.5 * Period duration

Type of output Highside

Functionality Sub-D interfaces

Type      X3

Type of interface            RS485

Connector          Sub-D, 9-pin, female

Electrically isolated        

MPI      

MP2I (MPI/RS232)          -

DP master          optional

DP slave              optional

Point-to-point interface             

5V DC Power supply      max. 90mA, isolated

24V DC Power supply    max. 100mA, non-isolated

Type      -

Type of interface            -

Connector          -

Electrically isolated         -

MPI       -

MP2I (MPI/RS232)          -

DP master          -

DP slave              -

Point-to-point interface              -

5V DC Power supply      -

24V DC Power supply    -

Functionality MPI

Number of connections, max.  32

PG/OP channel

Routing               

Global data communication      

S7 basic communication              

S7 communication         

S7 communication as server     

S7 communication as client        -

Transmission speed, min.           19.2 kbit/s

Transmission speed, max.          12 Mbit/s

Functionality PROFIBUS master

Number of connections, max.  32

PG/OP channel

Routing               

S7 basic communication              

S7 communication         

S7 communication as server     

S7 communication as client        -

Activation/deactivation of DP slaves     

Direct data exchange (slave-to-slave communication)  -

DPV1    

Transmission speed, min.           9.6 kbit/s

Transmission speed, max.          12 Mbit/s

Number of DP slaves, max.        32

Address range inputs, max.       2 KB

Address range outputs, max.    2 KB

User data inputs per slave, max.             244 Byte

User data outputs per slave, max.          244 Byte

Functionality PROFIBUS slave

Number of connections, max.  32

PG/OP channel

Routing               

S7 communication         

S7 communication as server     

S7 communication as client        -

Direct data exchange (slave-to-slave communication)  -

DPV1    

Transmission speed, min.           9.6 kbit/s

Transmission speed, max.          12 Mbit/s

Automatic detection of transmission speed      

Transfer memory inputs, max. 244 Byte

Transfer memory outputs, max.              244 Byte

Address areas, max.      32

User data per address area, max.           32 Byte

Functionality RJ45 interfaces

Type      X1/X2

Type of interface            Ethernet 10/100 MBit Switch

Connector          2 x RJ45

Electrically isolated        

PG/OP channel

Number of connections, max.  4

Productive connections              

Fieldbus              -

Type      -

Type of interface            -

Connector          -

Electrically isolated         -

PG/OP channel -

Number of connections, max.  -

Productive connections               -

Fieldbus              -

Point-to-point communication

PtP communication       

Interface isolated          

RS232 interface                -

RS422 interface                -

RS485 interface               

Connector          Sub-D, 9-pin, female

Transmission speed, min.           1200 bit/s

Transmission speed, max.          115.5 kbit/s

Cable length, max.         500 m

Point-to-point protocol

ASCII protocol  

STX/ETX protocol           

3964(R) protocol             

RK512 protocol -

USS master protocol     

Modbus master protocol           

Modbus slave protocol

Special protocols             -

Properties PROFINET I/O-Controller via PG/OP

Realtime Class  -

Conformance Class        PROFINET IO

Number of  PN IO devices          8

IRT support        -

Shared Device supported          

MRP Client supported 

Prioritized start-up         -

Number of PN IO lines  1

Address range inputs, max.       2 KB

Address range outputs, max.    2 KB

Transmiting clock            1 ms

Update time      1 ms .. 512 ms

Isochronous mode         -

Parallel operation as controller and I-Device     

Properties PROFINET I-Device via PG/OP

I/O Data range, max.     768 Byte

Update time      1 ms .. 512 ms

Mode as Shared I-Device            -

Management & diagnosis via PG/OP

Protocols            ICMP

DCP

LLDP / SNMP

NTP

Web based diagnosis   

NCM diagnosis -

Ethernet communication via PG/OP

Number of productive connections via PG/OP, max.     2

Number of productive connections by Siemens NetPro, max.  2

S7 connections BSEND, BRCV, GET, PUT, Connection of active and passive data handling

User data per S7 connection, max.         64 KB

TCP-connections             FETCH PASSIV, WRITE PASSIV, Connection of passive data handling

User data per TCP connection, max.      8 KB

ISO on TCP connections (RFC 1006)        FETCH PASSIV, WRITE PASSIV, Connection of passive data handling

User data per ISO connection, max.       8 KB

Ethernet open communication via PG/OP

Number of configurable connections, max.       2

ISO on TCP connections (RFC 1006)        TSEND, TRCV, TCON, TDISCON

User data per ISO on TCP connection, max.       32 KB

TCP-Connections native              TSEND, TRCV, TCON, TDISCON

User data per native TCP connection, max.        32 KB

User data per ad hoc TCP connection, max.       1460 Byte

UDP-connections            TUSEND, TURCV

User data per UDP connection, max.     1472 Byte

WebVisu via PG/OP

WebVisu is supported 

Max. number of connections WebVisu 4

WebVisu supports HTTP             

WebVisu supports HTTPS           

Housing

Material              PPE / PPE GF10

Mounting           Profile rail 35 mm

Mechanical data

Dimensions (WxHxD)    147 mm x 100 mm x 83 mm

Net weight         320 g

Weight including accessories     320 g

Gross weight     355 g

Environmental conditions

Operating temperature               0 °C to 60 °C

Storage temperature    -25 °C to 70 °C

Certifications

UL certification yes

KC certification yes